13
Projecting an Image
Projecting/Adjusting an Image
Adjusting the tilt of the projector
with the front feet (adjustable)
When the projector is installed on an uneven
surface or the projected position is low, you
can adjust using the front feet (adjustable).
To correct any trapezoidal distortion of the
projected image, use the Keystone
correction feature (pages13, 28).
• Be careful not to let the projector down on
your fingers.
• Do not push hard on the top of the projector
with the front feet (adjustable) extended.
• Keystone adjustment is an electronic
correction. Consequently the image quality
may deteriorate.
Displaying a pattern for adjusting
an image
You can display a pattern for adjusting the
projected image with the PATTERN key on
the Remote Commander. Press the
PATTERN key again to restore the previous
image.
Correcting for trapezoidal
distortion of the projected image
(Keystone adjustment)
If the screen is tilted, or you are projecting
from an oblique angle, perform keystone
adjustment.
Adjusting the Focus, Size, and Position of the Projected image
Focus Size (Zoom) Position (Lens shift)
Notes