35
Indicators
Others

BOthers

Indicators

The indicators allow checking the status and notify you of abnormal operatio n of the projector.

If the projector exhibits abnormal status, address the problem in accordance with the table

below.

ON/STANDBY indicator

WARNING indicator

Status Meaning/Remedies
Lights in red The projector is in standby mode.
Flashes in green • The projector is ready to operate after having been turned on.
• The light source cools after the projector is turned off.
Lights in green The projector’s power is on.
Lights in orange The projector is in With No Input (Light Cutoff), or Quick Reboot
standby mode.
Flashes in red The projector is in abnormal status. Symptoms are indicated by
number of flashes. Address the problem in accordance with the
following. If the symptom is shown again, consult with qualified Sony
personnel.
Flashes twice The internal temperature is unusually high. Check the items below.
• Check to see if nothing is blocking the ventilation holes.
• Check to see if the air filter is not clogged.
• Check if “Installation Attitude” on the Installation menu is correctly
selected.
Flashes six times Unplug the AC power cord from a wall outlet. After checking that the
ON/STANDBY indicator goes out, plug the power cord to a wall
outlet again then turn on the projector.
Other number of
flashes
Consult with qualified Sony personnel.
Status Meaning/Remedies
Flashes in red Symptoms are indicated by number of flashes. Address the problem in
accordance with the following.
Flashes twice The air filter cover or air filter unit are not attached securely.
Flashes three times The temperature of the light source is unusually high. Turn off the
power and consult with qualified Sony personnel.
Flashes eight times Drop impact has been detected .
If you detect an abnormal condition, consult with qualified Sony
personnel. If no abnormality is detected, unplug the AC power cord
from a wall outlet. After checking that the ON/STANDBY indicator
goes out, plug the power cord to a wall outlet again then turn on the
projector.