15
Projecting an Image
Projecting/Adjusting an Image
2Press the ENTER key.
The cursor appears.
3Adjust the position of the corner you
want to correct, using V/v/B/b.
The cursor will disappear when the
deflection range limit is reached.
Correcting deflection 1 – left/right
sides of the image
1Move x using V/v/B/b to select the
side you want to correct.
2Press the ENTER key.
The cursor appears.
3You can adjust the deflection of the
side, using V/v/B/b.
You can adjust the center point of
deflection using V/v. For the range of
deflection, use B/b. You can adjust the
left/right side independently.
The cursor will disappear if the
deflection range limit is reached.
Correcting deflection 2 – top/bottom
sides of the image
1Move x using V/v/B/b to select the
side you want to correct.
Adjust using this cursor
Example of cursor display:
Adjust in all directions
Leftward, rightward or
downward adjustment only
Adjust using this cursor
Example of cursor display:
Adjust in all directions
Upward, downward, or
rightward adjustment only