Preparation (continued)

4 Attach the supplied battery pack NP-FM30 for the LCD monitor to the rear shell. Be sure to charge the battery pack fully before attaching.

Note

Firmly insert the supplied battery cushion as shown to prevent the battery pack from coming loose if it is dropped or otherwise subjected to impact.

About the supplied battery pack NP-FM30

What is an “InfoLITHIUM” battery pack?

The “InfoLITHIUM” is a lithium ion battery pack which can exchange data with compatible electronic equipment about its battery consumption. Sony recommends that you use the “InfoLITHIUM” battery pack with electronic equipment having the

mark.

*The indication may not be accurate depending on the conditions and environment in which the equipment is used.

“InfoLITHIUM” is a trademark of Sony Corporation.

•To charge the supplied NP-FM30 battery pack, prepare AC adapter/charger that can charge “InfoLITHIUM” M series (optional).

•You can use also the “InfoLITHIUM” M series NP-FM50 (optional).

•The recording time of a fully charged NP-FM30 battery pack is approximately 5 hours (continuous recording). The actual recording time may be less, depending on conditions of use.

The “InfoLITHIUM” battery pack is recyclable. When the battery is exhausted and can no longer be recharged, cover the metal parts of the battery with an isolator such as scotch tape and take it to a battery recycling shop.

About the LCD monitor

•Install the camcorder to the marine pack and set the POWER switch to ON to make images appear on the LCD screen.

•The remaining battery time indicator displayed on the LCD monitor refers to remaining time of the camcorder battery time, not the remaining time of the LCD monitor battery.

•The LCD monitor of the marine pack does not correspond with the “InfoLITHIUM” battery pack.

12-GB