Installing the camcorder to the marine pack

1 Install the camcorder to the marine pack.

front shell

Connect the remote plug and the

 

microphone plug.

 

1 Connect the microphone plug to

 

the MIC jack (plug in power).

 

2 Connect the remote plug to the

 

LANC jack.

 

 

to the MIC jack

 

(plug in power)

to the LANC

jack

2 Insert the camcorder until the

 

mounting shoe clicks into place.

 

GB

3Connect the monitor cord to the

jack of camera mounting shoe B.

The cords are placed in the plug holders of the marine pack at the factory. Pull the plugs out of the holders when in use.

4 Attach the front shell to the rear shell. Hold both shells firmly and fasten the 3 latches securely.

Take care not to pinch the remote, microphone, and monitor cords. If this happens water may leak in.

For details on handling the O-ring, see page 22.

continued13-GB