Recording (continued)

Attaching the supplied accessories

Attaching the supplied wide-conversion lens

As objects appear 1/4 closer and therefore larger, the wide-conversion lens is recommended when you want to take pictures of wide areas. Note however, that objects will appear smaller.

Note

This supplied wide-conversion lens is to be used only underwater.

Attach the wide-conversion lens until it fits firmly.

Using the supplied sunshade

The supplied sunshade reduces glare from the LCD monitor.

Supplied sunshade

Attaching the supplied colour filter

When using the supplied colour filter, attach it on top of the wide-conversion lens.

Water absorbs light, especially red light, so that objects in deep water are seen bluish. The colour of objects is affected by the clarity of the water. To record in natural colour, use the supplied colour filter.

Wide-conversion lens

colour filter

You can attach and remove the wide-conversion lens, sunshade, and colour filter underwater.

If the image on the LCD screen is not clear because of air between these accessories and the marine pack, reattach them underwater.

Attaching the supplied strap

Attach the strap as the shown. Attach the supplied straps to prevent loss of these accessories when removing them both on land and underwater. Attach the straps to the grip of the marine pack.

18-GB

colour filter To attach the strap

Wide-

conversion Sunshade lens