Further, If the “Hardware Initialization Failure” window appears, select “I will connect the MSAC-PR1 later” to shut down the setup, and then recheck the connections.

Make sure the 25-pin connector is firmly connected to the parallel port.

The power to the MSAC-PR1 must be on. Insert the power connection cable associated with the keyboard connector of the PC, and connect it to the DC jack of the MSAC-PR1.

If the “Removable Disk” icon does not appear on restarting the PC even with the PC card inserted, it may be that the BIOS settings in the PC are not set correctly for MSAC-PR1. You will need to change the BIOS settings.

For details, refer to “Changing Settings for Installation” A (page 13) and B (page 14) to change the BIOS settings.

11 GB