BAdding MSAC-PR1 device driver parameters (for Windows 95/98 only)

If the MSAC-PR1 does not function normally, add device driver parameters according to the following procedure.

1Select “Properties” from the context menu when you right click over “This Computer” or double click “System” in the control panel to open the system properties window.

2Double click the device manager tab, then double click SCSI controller category to display “Sony MSAC-PR1” in the device list.

3Double click “Sony MSAC-PR1” to display the Properties window and then click the Settings tab.

4The adaptor setting will be “/flash/W95.” Add “/ni /de /di” to this and click “OK,” making sure there is a space before each slash.

14 GB