10

11

Device Selection (Windows NT 4.0 only)

With Windows NT 4.0, the following screen appears. Click the “OK” button.

Setup Complete

With Windows 95/98 you can use the PC card straight away. With Windows NT4.0, you have to restart the computer before you can use the PC card.

12Connecting the Printer

Turn the power to the PC off and connect the printer.

If the printer does not run normally.

Refer to “Changing Settings for Installation” C (page 15) and D (page 16).

Installing a new printer.

Turn the PC off, remove the device from the PC, and then connect the printer cable directly to the parallel port. After installing the printer driver, reconnect the printer cable to the printer connector of this device, and perform a test print. If the printing is unsatisfactory, refer to “Changing Settings for Installation” C (page 15) and D (page 16).

12 GB