Sony MSAC-PR1 22 GB, Symptom, Symptom, error occurs and printing cannot be done, message that files or data may have been lost

Troubleshooting

Before sending the equipment for repair, please check the following points. If the equipment still fails to function normally after you have checked everything, consult your local Sony service personnel.

Please refer to your PC Operating Manual.

Symptom		The MSAC-PR1 connector is connected to a printer but an
		error occurs and printing cannot be done.
		Or, reading/writing data cannot be done to the PC card.

	Cause/Action	There is some permanent application that keeps watch over
		the state of the printer. Printing cannot be done and the
		computer does not recognize the PC card in the normal way.
		Close the permanent application.

	Cause/Action	The parallel port settings on the computer are incorrect.
		Try changing the BIOS settings.

	Cause/Action	The printer is incompatible with this device.
		Some printers cannot be used when connected to the MSAC-
		PR1 printer connector.

Symptom		When writing or reading from Memory Stick, a disk
		writing error is displayed on a blue screen, with a warning
		message that files or data may have been lost.

Cause/Action		The Memory Stick erase protect switch is set to the “LOCK”
		position.
		Release the LOCK on the Memory Stick. The data in the
		Memory Stick will not be lost.

Symptom

error occurs and printing cannot be done.

When writing or reading from Memory Stick, a disk

message that files or data may have been lost.

22 GB