Viewing images using a computer

You can view or edit image data recorded with your camera using softwa in your computer. You can also attach the image data to e-mail.

Viewing images using a floppy disk drive

Example: For Windows Me users

1Turn on your computer and insert a flopp drive of your computer.

2Open“ My Computer” and double-click “ 3 1/2 Floppy (A:).”

3Double-click a file to be viewed. See“Image file storage destinations and image file names” (page 38) for details.

It is recommended that you copy a moving image file to the hard disk of your computer before viewing it. If you view the file directly from a floppy disk, the image may break off.

Playback B

Viewing images on a computer using the USB cable

This section describes the method for viewing images on a computer usi supplied USB cable.

The USB cableis used to connect the camera to a computer so that opera be performed on image files recorded in a floppy“MemorydiskStick”or afrom the computer.

In order to use the USB cable , a USB driver must be installed in the computer beforehand.

Be sure to also refer to the operation manuals for your computer and the application software.

Viewing images on Windows: page 28

Viewing images on Macintosh: page 34

Notes on using your computer: page 37

Notes

•Data recorded with your camera is stored in the following formats. Make sure that applicatio that support these file formats are installed on your computer.

—Still images (other than TEXT mode, uncompressed mode, and Clip Motion): JPEG format

—Moving images: MPEG format

—Uncompressed mode still images: TIFF format

—TEXT mode/Clip Motion: GIF format

•Depending on your application software, the file size may increase when you open a still ima file.

27