Playing back the still images in order

(SLIDE SHOW)

This function plays back the recorded still images one after another.

This function is useful for checking the recorded images or for presentations, etc.

1

2, 3

1 Set the PLAY/STILL/MOVIE selector to PLAY.

2 Select [FILE] and then [SLIDE SHOW] from the menu.Set the following items.INTERVAL

You can select from 1 min (one minute), 30 sec (30 seconds), 10 sec (10 seconds), 5 sec

(5 seconds), or 3 sec (3 seconds).REPEAT

ON: Plays back images continuously in a loop until [RETURN] is selected (the slide show stops automatically after approximately 20 minutes* when the image is played back from a floppy disk).

OFF: After all images have been played back, the slide show ends.

The slide show does not end until all the images are played back, even if it takes more than 20 minutes.

3 Select [START].The slide show begins.
To cancel the slide showSelect [CANCEL] in step 2 or 3.To skip to the next/previous image during the slide showSelect \b/B\ at the lower-left on the LCD screen.

Note

The interval setting time may vary depending on the image size.

72