Sony MVC-FD200 If the Removable Disk does not appear, If the Copy Wizard appears (for Windows XP users)

If the Copy Wizard appears (for Windows XP users)

Use the following procedure to copy an image data from your camera to computer.

1Click“Copy pictures to a folder on my computer using Microsoft Scanner and Camera Wizard,” and then click “OK.”

2Follow the instructions displayed on the screen to copy an image. Select“My Documents” (example) as the copy destination.

To copy another image, click “Finish”, disconnect the USB cable, and connect it again. Then, repeat the procedure in the Copy Wizard screen.

If the Removable Disk does not appear

Delete a driver registered unintentionally while your camera is connecte
computer. See“Step 2 Connecting your camera to your computer using the USB	B
	Playback

cable (page 30)” for the connecting method. Perform all steps below to install the USB driver properly.

1 Open “Device Manager” on your computer.

For Windows 2000 users:

Select“My Computer” t“Control Panel” t “System” open “Hardware” tab, and then click “Device Manager.”

For Windows 98, Windows 98SE, Windows Me users:

Select “My Computer” t“Control Panel” t “System” and click “Device Manager.”

2 Check whether a USB driver is already installed.

1

2

1Click“Other Devices.”

2Check“ forSony DSC” or “ Sony Handycam” with a question mark.

33