Notes

•You cannot copy uncompressed images.•You cannot copy the image that is bigger than 1.4 MB.

•You cannot copy the images that the total amount of the images is bigger than

1.4 MB. If “NOT ENOUGH MEMORY”

appears or flashes on the INDEX screen, cancel some images to copy and try again.

•If you eject and insert the floppy disk or the“Memory Stick” without selecting [EXIT] after “COMPLETE” appears, the image will be copied.

•The number of floppy disks that is needed for copying is as a guide, which is displayed when selecting [MSt FD].

Copying all the information on your floppy disk (DISK COPY)

You can copy to another disk not only the images you have recorded with your camera but also various files you have created in other software with your computer.

Notes

•Once you carry out DISK COPY, all information saved on the recipient floppy disk is erased to be replaced by newly written data including the protected image data. Check the contents of the recipient disk before copying the disk.

•Be sure to use the floppy disk that has been formatted by this camera to carry out DISK COPY (page 81).

1, 4

3

1 2

1 Set the MS/FD selector to FD, then insert the floppy disk to be copied.2 Select [FILE], [DISK TOOL], [DISK COPY], and then [OK] from the menu.“DISK ACCESS” appears.3 When “CHANGE FLOPPYDISK” is displayed, eject the floppy disk.“INSERT FLOPPY DISK” appears.
Editing B

79