Sony MVC-FD200 mark, work, MOVIE, Symptom, computer, monochrome, moving pictures, The image is in, tSet it to STILL, played back on a, very bright subject

Symptom	Cause and/or Solution
You cannot display a print • You cannot display print marks on moving images,
mark.	text images and Clip Motion images.

The picture is noisy. • Your camera is placed near a TV or other equipment that uses strong magnets.

tMove your camera away from the TV, etc.

The picture is too dark. • You are shooting a subject with a light source behind the subject.

tAdjust the exposure (page 67).•The brightness of the LCD screen is too low.tAdjust the brightness of the LCD screen (page 20).

The flash does not work. • The flash is set to .

tSet the flash to (no indication), , or (page 22).

•The camera is in one of the following PROGRAM AE modes: Twilight, Twilight plus, or Landscape.

tCancel the PROGRAM AE function or set theflash to (pages 22, 65).•The PLAY/STILL/MOVIE selector is set toMOVIE.tSet it to STILL.

The date and time are	• The date and time are not set correctly.
recorded incorrectly.	tSet the correct date and time (page 14).
Vertical streaks appear	• This is called the smear phenomenon.
when you are shooting a	tThis is not a malfunction.
very bright subject.
The zoom does not work.	• PROGRAM AE is set to the Panfocus mode.
	tCancel the Panfocus mode (page 65).
Digital zoom does not	• You cannot use digital zoom when recording
work.	moving pictures.
	• Digital zoom is set to [OFF].
	tSet digital zoom to [ON] at the menu.
The image is in	• You shot the image in TEXT mode.
monochrome.	tCancel the TEXT mode (page 62).
	• The picture effect is set to B&W.
	tCancel the B&W mode (page 69).
The image cannot be	tConsult the computer or software manufacturer.
played back on a
computer.

information Additional

89