masterpage:Left
filename[D:\WORKS\Mavica\3rd\3066743111\3066743111MVCFD97UC\02GB-
MVCFD97UC\09add.fm]
82
modelname1[MVC-FD97]
[3-066-743-11(1)]

Reinstall the USB driver when using Windows 98, Windows

98SE, Windows Me and Windows 2000 Professional

Yourcomputer does not
recognize your camera. Thebattery level is low.
tUsethe ACpower adaptor (pag e 13).
Thecamera i s turned off.
tTurnon the camera.
TheUSB cable is not connected firmly.
tDisconnect the USB cable, and connect it again
firmly.Make sure that USB MODEis
displayedontheLCDscreenoronthefinder
(page31) .
TheUSB connectors on your computer are
connectedto other equi pment besides the keyboard,
themous e, and your camera.
tDisconnect the USB cables except for the ones
connected to the keyboard, the mouse, and your
camera.
Theposition ofthe MS/FD sel ector is not set to the
properpos ition for the media being used.
tSetthe MS/FD selector to the proper position.
TheUSB driver is not installed.
tInstallt he USB driver (page 31).
ForW indows98, Windows 98 SE, Windows
Mean d Windows 2000 Professional users
Sincethe camera is connected to a computer with
theUSB cable before installing the USB driver, the
driveis not recogni zed properly by the computer.
tDeletethe drive which is not recognized
properly,theninstall the USB driver.For details,
seethe pr ocedure below.
1Turnon your computer and allow Windows to load.
2Connect the USB jack on the camera and the computer with the
supplied USB cable.
3Insert a media and set the MS/FD selector to the appropriate
position according to the media inserted.
4Connect the ACpower ad aptor to your camera and then to a wall
outlet(m ains), and turn on the power of your camera.
Symptom Cause and/or Solution
01cov.book Page82 Wednesday, January17, 2001 9:10AM