While playing, press MENU.

Adjusting treble or bass (Digital Sound Preset)

You can adjust the treble and bass to suit your taste. The player can store two sets of treble-bass adjustments, which can then be selected later during playback.

MENU

ENT/NX, ., >, x/CANCEL

Selecting the sound quality

Factory settings

Factory settings of the digital sound preset are as follows:

•“SOUND1”: bass +1, treble ±0

•“SOUND2”: bass +3, treble ±0

1

2 Press . or > repeatedly until “SOUND” appears in the display, and press ENT/NX.

3 Press . or > repeatedly to select “SOUND1”, “SOUND2”, or “OFF” in the display, and then press ENT/NX to enter the selection. Selecting “OFF” turns off the digital sound preset function.

Adjusting the sound quality

You can change the preset sound quality. To change the preset sound quality, select “SOUND1” or “SOUND2”, the one you want to change, in advance.

1 While playing, press MENU.

2 Press . or > repeatedly until “SOUND” appears in the display, and then press ENT/NX.

3 Press . or > repeatedly until “SET” appears in the display, and then press ENT/NX.

4 Press . or > repeatedly until “SOUND1” or “SOUND2” appears in the display, and then press ENT/ NX.

The display shows the current “BASS” sound setting.

5 Press . or > repeatedly to adjust the sound level.

Shows “SOUND1” or “SOUND2” is selected

The sound can be adjusted in 8 steps. (–4, –3, ...±0, ...+2, +3)

6 Press ENT/NX.

“BASS” is set and the display changes to “TRE” (treble) setting mode.

7 Press . or > repeatedly to adjust the sound level, and then press ENT/NX to enter the selection.

“TRE” (treble) is set.

The sound settings are saved and the playback display appears again.

19