Using a MD Walkman connected to the computer
Problem | Cause/Remedy |
|
|
Your computer does not | The MD Walkman is not firmly connected with the |
recognize the MD Walkman. | supplied dedicated USB cable to the computer. |
| tReconnect the MD Walkman to the computer firmly. |
| A disc is not inserted in the MD Walkman. |
| tCheck if a disc is inserted in the MD Walkman. |
| The Net MD driver is not be installed. |
| tInstall the SonicStage/MD Simple Burner software |
| using the supplied |
|
|
Even though the dedicated | It takes time to recognize SonicStage. Please wait. |
USB cable is used to connect | The other application software is running. |
the MD Walkman to the | tReconnect the supplied dedicated USB cable after a |
computer, the display on the | while. If the computer still does not recognize the |
MD Walkman does not indicate | MD Walkman, disconnect the MD Walkman, restart |
it is connected. | the computer, and connect the dedicated USB cable |
| again. |
|
|
The progress bar on the display | The supplied dedicated USB cable is disconnected. |
is not moving. The access lamp | tConnect the supplied dedicated USB cable firmly. |
has not lit for a few minutes. | The connections are made through a USB hub. |
| tOperations are not guaranteed for |
| connections. Connect the MD Walkman directly to |
| the USB connector on the computer. |
|
|
53