The player does not | • The HOLD function is turned on (“HOLD” appears in the display |
work or works | when you press an operation button on the player). |
poorly. | , Disable HOLD by sliding the HOLD switch to the opposite |
| direction of the arrow. |
| • The lid is not firmly closed. |
| , Close the lid until it clicks. |
| • Moisture has condensed inside the player. |
| , Take the MD out and leave the player in a warm place for |
| several hours until the moisture evaporates. |
| • The dry battery is weak (“LoBATT” flashes or nothing appears). |
| , Replace the dry battery with a new one. |
| • The dry battery have been inserted incorrectly. |
| , Insert the battery correctly. |
| • An MD with nothing recorded on is inserted (“BLANK” appears |
| in the display). |
| , Insert a recorded MD. |
| • The disc is damaged or does not contain proper recording (“Rd |
| ERR” appears in the display). |
| , Reinsert the disc. If the error message still appears, replace it |
| with another disc. |
| • While operating, the player received a mechanical shock, too |
| much static, abnormal power voltage caused by lightning, etc. |
| , Restart the operation as follows. |
| 1 Remove the dry battery from the player. |
| 2 Leave the player for about 30 seconds. |
| 3 Insert the dry battery. |
|
|
The player will not | • A |
play. | , |
| played on this player. |
|
|
Explanations
About the DSPThis player supports playback with the DSP
The
31