Troubleshooting and explanations
Troubles and solutions
If you find any troubles operating the player, follow the steps below.
1 Check this section, “Troubles and solutions” (page 29).
2 If you cannot solve the problem after you made checks, consult your nearest Sony dealer.
While playing
Symptom | Cause/Remedy |
|
|
An MD is not | • Repeat play is selected. |
played normally. | , Use MENU on the player to change back to the normal play |
| |
| • Playback mode is changed. |
| , Use MENU on the player to change back to the normal play |
| |
|
|
An MD is not | • Disc playing stopped before it came to the last track. |
played from the | , Press NX for 2 seconds or more to start playing. |
first track. | • Group play mode is selected. |
| , Use MENU on the player to change back to the normal play |
| (page 18), and then press NX for 2 seconds or more to start |
| playing. |
|
|
The digital sound | • The digital sound preset is off. |
preset function | , Select “SOUND1” or “SOUND2” (page 19). |
does not work. |
|
|
|
Playback sound | • The player is placed where it receives continuous vibration. |
skips. | , Put the player on a stable place. |
| • A very short track may cause sound to skip. |
| , Try not to create a track under one second long. |
|
|
Sound has a lot of | • Strong magnetism from a television or such device is interfering |
static. | with operation. |
| , Move the player away from the source of strong magnetism. |
|
|
Noise is | • The sound was recorded in LP4 stereo mode. |
momentarily | , Because of the nature of the compression method used in LP4 |
heard. | mode, noise may be output on very rare occasions during |
| playback of sound recorded in this mode. |
|
|
Volume cannot be | • AVLS is on. |
turned up. | , Release AVLS settings (page 25). |
|
|
29