On cleaning

After wiping the player casing with a soft cloth slightly moistened with water, wipe it again with a dry cloth. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzene as this may mar the finish on the casing.

Wipe the disc cartridge with a dry cloth to remove dirt.

Dust on the lens may prevent the unit from operating properly. Be sure to close the disc compartment lid after inserting or ejecting an MD.

To maintain good sound quality, use a soft cloth to clean the plugs of the headphones/ earphones. A dirty plug may cause noise or intermittent breaks in the sound during playback.

Clean the terminals periodically with a cotton swab or a soft cloth as illustrated.

Dry battery compartmentTerminalsWhen recording with the supplied application software

Before you remove the MD after the transfer of audio data from your computer has completed

Make sure that “TOC Edit” has disappeared in the display, and then press the x (stop) button.

If the power source (battery) accidentally becomes disconnected during recording

The lid may refuse to open. If this happens, do not open the lid by force. Do the steps below instead.

1Connect the power source (battery) firmly to the player.

2Press the OPEN button to open the lid.

To protect a recorded MD

To record-protect an MD, slide open the tab at the side of the MD. In this position, the MD cannot be recorded. To record again, slide the tab back so the tab is visible.

Tab
Back of the MD

Recorded material is

protected.

Recorded material is not protected.

If you have any questions or problems concerning your player, please consult your nearest Sony dealer. (If a trouble occurred when the disc was in the player, we recommend that the disc be left in the player when you consult your Sony dealer so that the cause of trouble may be better understood.)

When consulting your Sony dealer, be sure to bring the player and the headphones/earphones.

27