Dividing a track (Divide)

You can divide a track with a track mark, creating a new track from the part following the track mark. You can also make fine adjustments to the track mark position before making the actual division. The track numbers will increase as follows.

Notes

•You cannot add a track mark on a track that has been transferred from your computer.

•You cannot divide a track that has been recorded in Hi-MD mode using the MD Simple Burner software.

•The Bookmark and Program settings will be erased if you carry out the Divide function.

•You cannot divide a track at its beginning or end.

•You cannot divide a track if after the division causes the total number of tracks on the disc to exceed the maximum allowed (2,047 tracks for a disc used in Hi-MD mode or 254 tracks for a standard disc).

1

 

 

2

3

4

 

 

Track marking

 

 

 

 

 

 

 

 

 

 

 

1

 

2

 

3

4

5

 

Track numbers increase.

 

 

5-way control key

T MARK

N

ENT, FR, FF)

(

 

Jog dial

Dividing a track directly

While playing or pausing, press T MARK on the recorder at the point you want to mark.

“MARK ON” appears in the display, and a track mark is added. The track number will increase by one.

Adjusting the dividing point before dividing a track (Divide Rehearsal)1 While playing, press T MARK for 2 seconds or more.

Four seconds of the track from the point T MARK is pressed is played back repeatedly.

The point T MARK is pressed.

Four seconds of the track plays back repeatedly.

62