Symptom

Cause/Remedy

 

 

There is no R-

• There is no R-channel output if the cassette deck or an amplifier is

channel sound output

connected with a monaural cord.

when playing a track

, Make sure to use a stereo connecting cord. If, however, the
recorded from aconnected equipment is monaural, there will be no R-channel
cassette deck orsound output even with a stereo connecting cord.

through an amplifier,

 

or when listening to

 

sound from a cassette

 

deck or amplifier.

 

 

 

While editing

Symptom

Cause/Remedy

 

 

“NotENOUGH

• Editing is not possible when using a 1GB Hi-MD disc even when the

POWER TO EDIT”battery level indication shows enough power remaining while the
appears and editing

recorder is stopped or playing. This is because of a mechanism that

cannot be done on a

disables editing when the remaining battery power is estimated by the

1GB Hi-MD disc.

recorder to be insufficient due to the high power consumption required

 

for 1GB Hi-MD disc editing.

 

, Connect the AC power adaptor to the recorder or insert a fully

 

charged rechargeable battery or a new alkaline dry battery.

 

 

The lid does not• The power sources have been disconnected during recording or
open.editing, or the battery have been exhausted.

 

, Set the power sources again, or replace the exhausted battery with

 

new ones.

 

 

Editing cannot be• The power source has been disconnected or a power outage has
done.occurred during editing.

 

, The editing done to that point is not saved to the disc. Do the

 

editing operation again.

 

 

Non-audio data• Non-audio data cannot be erased with the Erase function.
cannot be erased., Confirm the contents by connecting the recorder to your

 

computer. If it is okay to delete the contents, then perform the

 

Format function (page 55).

 

 

Tracks cannot be

• This is due to the MiniDisc system limitations. When the tracks are

combined.

scattered and the length of each track is short*, you may not be able to

 

combine the tracks.

 

* Combining tracks of the following lengths may not be possible.

 

Hi-MD mode

 

Linear PCM stereo: 9 seconds or less

 

Hi-SP stereo: 8 seconds or less

 

Hi-LP stereo: 32 seconds or less

 

MD mode

 

SP stereo: 12 seconds or less

 

LP2 stereo/Monaural: 24 seconds or less

 

LP4 stereo: 48 seconds or less

 

 

72