Sony MZ-NH700 procedure above, 2 Play the sound source, Select “:REC Off” at the end of the, Recording tracks to an existing group, To record without creating a new group

Note

It will not be possible to make a group setting if the tracks, groups and disc name on a disc exceed the maximum number that can be input (in MD mode only).

T MARK/REC	Jog dial
	NAVI/
	MENU

GROUP

X5-way control key (NENT)

To create a new group automatically when recording

The recorder is factory set to create a new group automatically when recording. This is convenient when recording several CDs in succession. You can check the group recording setting as follows.

While the recorder is stopped, enter the menu and select “REC Set” - “ :REC” - “ : REC On”.

To record without creating a new groupSelect “ :REC Off” at the end of theprocedure above.

Recording tracks to an existing groupYou can add a track to an existing group.Adding a new track at the end of the selected group

1 While the recorder is stopped and the group to which you want to add a track is selected, press NENT while pressing T MARK/REC and GROUP.

2 Play the sound source.A new track will be added at the end of the current contents within the group.Adding a track at a desired position within the selected group

1 While the recorder is play-paused at the point within the group where you want to add a new track, press NENT while pressing T MARK/ REC and GROUP.

2 Press X to start recording and play the sound source.

35