3Play an MD.
(•+
p•ENTER
VOL• POSITION +/–
1Press (((•+on the
remote control).
A short beep sounds in the headphones when you operate on the remote control.
p•CHARGE
(•ENTER
VOL +/–
2Press VOL +/– to adjust the
volume.
The volume will be shown in the display.
To stop play, press p.
A long beep sounds in the headphones when you operate on the remote control.
To | Do this (Beeps in the headphones) |
Pause | Press P(Continuous short beeps) |
| Press Pagain to resume play. |
|
|
Find the beginning of the current track | Press =once (Three short beeps) |
|
|
Find the beginning of the next track | Press +once ((•+on the remote |
| control) (Two short beeps) |
|
|
Go backwards while playing1) | Keep pressing = |
Go forward while playing1) | Keep pressing +((•+on the remote |
| control) |
|
|
Remove the MD | Press pand slide OPEN to open the lid.2) |
1)To go backward or forward quickly without listening, press Pand then keep pressing =or +((•+on the remote control).
2)Once you open the lid, the point to start play will change to the beginning of the first track.
If the play does not start
Make sure the recorder is not locked (page 17).
Note
•The sound may skip during playback when the recorder is exposed to continuous vibration, such as while jogging.
When using optional headphones
Use only headphones with stereo mini plugs. You cannot use headphones with micro plugs.
z
Playback will switch automatically between stereo and monaural according to the sound source.