3 Press ENTER.
4 Press =or +((•+on the remote control) repeatedly to select a letter and press ENTER to enter. The selected letter stops flashing and the cursor moves to the next input position.
Press | To |
CAPS | Switch between capital |
| letters, small letters, and |
| marks/numbers. |
|
|
VOL +/– | Move the cursor to the |
| left or right. |
|
|
=/+ | Change the letter to the |
| one before/next one. |
|
|
INSERT | Insert a blank space to |
| type in a new letter. |
|
|
DELETE | Delete a letter and move |
| back all following letters |
| to the left. |
pCancel labeling.
CANCEL | Cancel labeling. |
5 Repeat step 4 and enter all characters of the label name.
6 Keep pressing ENTER for 2 seconds or longer.
The track or disc is labeled.
Labeling a track during playback
1 Insert a disc and play the track you want to label.
2 Keep pressing EDIT for 2 seconds or longer.
“ ” “Name” flashes in the display.
3 Press ENTER.
The track is ready to be labeled.
4 Follow steps 4 to 6 of “Labeling a disc during stop” above.
Labeling a track or a disc during recording
1 Keep pressing EDIT for 2 seconds or longer during recording.
“ ” “Name” flashes in the display.
2 To label a track, press ENTER. To label a disc, press =or + ((•+on the remote control) repeatedly until “ ” “Name” flashes in the display, then press
ENTER.
3 Follow steps 4 to 6 of “Labeling a disc during stop” above.
To cancel labeling, press CANCEL.
Available characters
•Capital and small letters of the English alphabet
•Numbers 0 to 9
•! " # $ % & ( ) * . ; < = > ? @ _ ` + – ' , / : _ (space)
To relabel recordings
Follow the steps corresponding to the labeling method until the disc or track is ready to be labeled. Enter a new character over the one you want to change, then keep pressing ENTER for 2 seconds or longer.
Notes
•You cannot relabel premastered MDs or label MDs that have not been recorded.
•The recorder is able to display, but cannot label using, Japanese “Katakana” characters.