Messages
If the following error messages flash in the display window, check the chart below.
Error message | Meaning/Remedy |
BLANK | • An MD with no recording on it is inserted. |
| b Insert a recorded MD. |
|
|
ERROR | • The disc is damaged or does not contain proper recording or |
| editing data. |
| b Reinsert the disc. If this fails, rerecord. |
FULL
EDIT
•There is no more space to record on the disc (less than 12 seconds
available).
b Replace the disc.
•You tried to enter more than 200 letters to label a single track or disc.
•You tried to enter a total of more than 1700 letters for track or disc names during playback or stop.
•You tried to enter a total of more than 500 letters for track or disc
names during a single recording.
b Enter the characters within the limit.
•The MD player is recording information (track start and end
position) from the memory to the disk.
b Wait until this process is completed. Do not expose the player to physical shock, nor disrupt power supply.
BUSY | • You tried to operate the recorder while it was accessing the |
| recorded data. |
| b Wait until the message goes out (in rare cases, it may take |
| minutes). |
HiDCin | • Voltage of the power supply is too high (The supplied AC power |
| adaptor is not used). |
| b Use the supplied AC power adaptor. |
HOLD | • The recorder is locked. |
| b Slide HOLD against the arrow to unlock the recorder (page 17). |
LoBATT | • Batteries are weak. |
| b Charge the rechargeable batteries or replace the dry batteries |
| (pages 23, 24). |
MEMORY | • You tried to record when there is no indication in the display, with |
| the recorder placed where it receives continuous vibration. |
| b Put the recorder on a stable place, and start recording again. |