(•+
=
Adding a track mark
You can add track marks so that the part after the new track mark is counted as a
p•ENTER
T MARK•CANCEL
EDIT•INSERT
new track.
The track numbers will increase as follows.
1 Keep pressing EDIT for 2 seconds or longer during stop. “ ” “Name” flashes in the display.
2 Press =or +((•+on the remote control) repeatedly until
“ ” “Erase” flashes in the display.
3 Press ENTER.
“Erase?” and “ENTER” appear alternately in the display.
To cancel erasing, press por
CANCEL.
4 Press ENTER again.
“EDIT” flashes in the display, and all the tracks will be erased.
When erasing is complete, “BLANK” flashes in the display.
1 |
|
| 2 | 3 |
| 4 |
| |
|
|
| 4 |
|
|
|
| |
| . | Track marking |
|
| ||||
|
|
|
|
|
|
|
| |
1 |
| 2 |
| 3 | 4 |
| 5 |
|
|
| Track numbers increase |
T MARK•CANCEL
Bottom
1 While playing or pausing an MD, press T MARK on the recorder at the point you want to add a mark.
“T. ON” appears in the display, and a track mark is added. The track number will increase by one.
To add track marks while recording
Press T MARK.
Note
T MARK on the remote control does not function during playback.