zEditing recorded tracks

You can edit your recordings by adding/ erasing track marks or labeling tracks and MDs. Premastered MDs cannot be edited.

Notes on editing

•Do not move or jog the recorder while “EDIT” is flashing in the display.

•You cannot edit tracks on an MD that is record-protected. Before editing tracks, close the tab on the side of the MD.

Erasing tracks

To erase a track

You can quickly erase a recorded track. Note that once a recording has been erased, you cannot retrieve it. Make sure of the track you are erasing.

p•CHARGE (•ENTER

1 Keep pressing EDIT for 2 second or longer while playing the track you want to erase.

“ ” “Name” flashes in the display, and the recorder plays the selected track repeatedly.

2 Press =or +((•+on the remote control) repeatedly until

“ ” “Erase” flashes in the display.

3 Press ENTER.

“Erase?” and “ENTER” appear alternately in the display.

To cancel erasing, press por

CANCEL.

To erase a part of a track

Add track marks at the beginning and the end of the part you want to erase, then erase the part.

=+

TMARK•CANCEL (at the bottom)

DISPLAY•EDIT•INSERT (at the bottom)

(•+

=

T MARK•CANCEL

p•ENTER

EDIT•INSERT

To erase the whole disc

You can quickly erase all the tracks and data of the MD at the same time.

Note that once a recording has been erased, you cannot retrieve it. Be sure to check the contents of the disc you want to erase.

p•CHARGE (•ENTER

=+

T MARK•CANCEL (at the bottom)

DISPLAY•EDIT•INSERT (at the bottom)

18-GB