z
•You cannot pause manually during
•When there is no sound from the player for more than 3 seconds during synchro- recording, the recorder goes into the standby mode automatically. When the sound comes from the player again, the recorder resumes
Notes
•Do not switch SYNCHRO REC after step 2. Recording may not be done properly.
•When recording in monaural, follow steps 1 and 2 of “Recording in monaural for double the normal recording time” (page 13) before
Connect a stereo microphone
Stereo microphone
to MIC (PLUG IN POWER)
MIC SENS (at the bottom)
1 Select the sensitivity with MIC SENS (at the bottom of the recorder) . Usually, set it to HIGH. When recording loud sounds such as a live concert, set it to LOW.
2 Insert a recordable MD and start recording.
Press and slide REC to the right. “REC” lights up and recording starts. For other operations, see “Recording an MD right away! ” (page 6).
Note
To record from a microphone, you must first disconnect any digital source. If connected, the recorder will not switch to microphone input.