zEditing recorded tracks
You can edit your recordings by adding/ erasing track marks or labeling tracks and MDs. Premastered MDs cannot be edited.
Notes on editing
•Do not move or jog the recorder while “Toc Edit”* is flashing in the display.
•You cannot edit tracks on an MD that is
*TOC = Table of Contents
To erase the whole disc
You can quickly erase all the tracks and data of the MD at the same time.
Note that once a recording has been erased, you cannot retrieve it. Be sure to check the contents of the disc you want to erase.
p
Erasing tracks
To erase a track
Note that once a recording has been erased, you cannot retrieve it. Make sure of the track you are erasing.
p
ERASE
1 Press ERASE while playing the track you want to erase.
“Erase OK?” and “Push Erase” appear in the display alternately, and the recorder plays the selected track repeatedly. To cancel erasing, press p.
2 Check the track number in the display and press ERASE again. The track is erased from the MD and the remaining tracks are renumbered.
To erase a part of a track
Add track marks at the beginning and the end of the part you want to erase, then erase the part.
ERASE
REC
1 In stop mode, keep pressing ERASE and press and slide REC to the right. "All Erase?" and "Push Erase" appear in the display alternately. To cancel erasing, press p.
2 Press ERASE again.
”Toc Edit” flashes in the display. When erasing finishes, “BLANK DISC” appears.