To stamp the date and time on the MD when you record, you first need to set the clock.
(+ =
CLOCK SET
(at the bottom)
1 Connect the power source.
Use the supplied AC power adaptor.
2 Press CLOCK SET at the bottom of the recorder.
Use a pointed object.
The digits of the year flash.
DATE
AM
3 Change the current year by pressing
=or +.
To change the digits rapidly, keep pressing =or +.
4 Press (to enter the year. The digit of the month flashes.
5 Repeat steps 3 and 4 to enter the current month, date, hour, and minute.
When you press (to enter the minute, the clock starts operating.
If you make a mistake while setting the clock
Press p, and set the clock again from step 2. You can skip a step by pressing (.
To display the current time
When the recorder is not operating or while recording, press DISPLAY repeatedly until the current time appears in the display.
To display the time in the 24- hour system
While setting the clock, press DISPLAY. To display the time in the
Charging the
When you use the recorder for the first time or after a long period of disuse, charge the