JVC HM-HDS1EU specifications Auto Set Up - referring to the front display panel

EN

Auto Set Up — referring to the front display panel

The Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically.

BEFORE YOU START PLEASE MAKE SURE THAT:

8The TV aerial cable is connected to the ANTENNA IN connector on the rear panel of the video recorder.

8The video recorder’s mains power cord is connected to a mains outlet.

8 The video recorder is turned off.

8 Load batteries into the remote control.

1

2

Press 1 (recorder/remote).

Press rt (remote) to select the international telephone country code.

(Example) DEUTSCHLAND (49) is selected.

International Telephone Country Code

BELGIUM	:	32	NORGE	:	47
CESKÁ REPUBLIKA	:	42	ÖSTERREICH	:	43
DANMARK	:	45	POLSKA	:	48
DEUTSCHLAND	:	49	PORTUGAL	:	351
ESPAÑA	:	34	SUISSE	:	41
GREECE	:	30	SUOMI	:	358
ITALIA	:	39	SVERIGE	:	46
MAGYARORSZÁG	:	36	OTHER WESTERN EUROPE	:	– –
NEDERLAND	:	31	OTHER EASTERN EUROPE	:	EE

●If you have selected 32 (BELGIUM) or 41 (SUISSE), press OK (remote) and select the language code by pressing rt (remote), then go to step 3.

(Example) FRANCAIS (03) is selected for BELGIUM (32)
		Language Code
.
		ENGLISH	:	01	NEDERLANDS	:	06
		DEUTSCH	:	02	SVENSKA	:	07
		FRANCAIS	:	03	NORSK	:	08
	International telephone Language code
		ITALIANO	:	04	SUOMI	:	09
	country code	CASTELLANO	:	05	DANSK	:	10

●If you have selected 36 (MAGYARORSZÁG), 42 (CESKÁ REPUBLIKA), 48 (POLSKA) or EE (OTHER EASTERN EUROPE), press OK. The Clock Set screen appears. Set the clock manually ( pg. 88), then go to step 3.

●If you have selected any other country name (code), press OK and go to step 3.

3 Press OK (remote). “Auto” appears on the front display panel.

4 Press OK (remote) to start Auto Set Up. Do NOT press any button on the video recorder or remote control during “Auto” is blinking.

●If you have connected the recorder to a TV offering T-V Link via a 21-pin SCART cable ( pg. 12) and the TV is turned on, the recorder automatically performs “Preset Download” ( pg. 16) even if you select “Auto” in step 4.

●If “– –:– –” appears on the front display panel, see page 17 of the instructions.

*Once you have performed Auto Set Up, even if the recorder’s memory backup has expired, the recorder will not perform Auto Set Up again. Perform tuner setting ( pg. 80) and/or clock setting ( pg. 88) as required.

FOR MORE INFORMATION SEE

INSTRUCTIONS ON PAGE 14

Printed in Japan 0701MNV*ID*VP