JVC HM-HDS1EU Set Stations A, Set Stations B, C Select the new station, D Switch the stations

EN 85

Set Stations (A)

Set station names that are registered in your recorder.

Perform steps A and C of “Manual Channel Set” on page 82 to access the Confirmation screen before continuing.

A Select the item.

Press rt w e until the item you want begins blinking.

B Access the Manual Channel Set screen.

Press OK twice.

C Select the new station.

Press e until the station name (ID) begins blinking, then press rt until the new station’s name (ID) you want to store begins blinking. Registered station names ( pg. 87) appear as you press rt.

D Switch the stations.

Press OK.

●The Confirmation screen appears.

●Repeat steps A – D as necessary.

E Close the Confirmation screen.

Press MENU.

Set Stations (B)

Set station names other than the ones registered in your recorder.

Perform steps A and C of “Manual Channel Set” on page 82 to access the Confirmation screen and then perform steps A and B of “Set Stations (A)” in the left column before continuing.

A Select the character for station name.

Press e until the first letter of the station name begins blinking.

B Enter the new character.

Press rt to cycle through the characters (A–Z, 0–9, –, f, +, I (space) ) and stop when the desired character is indicated, then press e to enter. Enter the remaining characters the same way (maximum of 4). After entering all characters, press OK.

●The Confirmation screen appears.

●If you make a mistake, press w until the incorrect character begins blinking. Then enter the correct character by pressing rt.

C Close the Confirmation screen.

Press MENU.

NOTE:

The characters available for the station name (ID) are A–Z, 0–9,

–, f, +, I (space) (maximum of 4).