44 EN | TIMER RECORDING (cont.) |
Express Timer
Programming
You can programme this recorder to
If you do not know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your recorder to
A Turn on the recorder.
Press 1.
B Select the deck.
Press HDD or
●For the VHS deck:
Insert a cassette with the record safety tab intact.
C Access the programme screen.
Before performing Express Timer Programming:
●Make sure that the recorder’s
●Turn on the TV and select the AV mode.
Press PROG.
●When “PROGRAMME FULL DELETE UNWANTED TIMER PROGRAMME” appears on the TV screen, you need to
cancel some of the reserved programmes. ( pg. 46)
PROGRAMME
RECORD TO
HDD
START
–
CONFIRM
+ | + |
| + |
| + |
– | – |
| – |
| – |
START | STOP | DATE | PR |
REC MODE | WEEKLY/DAILY | VPS/PDC |
SEP |
| ON |
STOP | DATE | TV PROG |
– | – | – – |
CANCEL CATEGORY UNDECIDED
PROG. CHANGE SETTINGS BY REMOTE
THEN CONFIRM
EXIT
D Enter the programme start time.
Press START+/– to enter the time you want recording to start.
●Press and hold START+/– to move in
E Enter the programme stop time.
Press STOP+/– to enter the time you want recording to stop.
●Press and hold STOP+/– to move in
F Enter the programme date.
Press
●The current date appears on the TV screen. The date you enter appears in its place.
G Enter the channel position.
Press
H Set the tape speed.
Press MODE (p).
●For the VHS deck:
It is not possible to select EP mode if “COLOUR SYSTEM” is set to “MESECAM”. ( pg. 76)