JVC HM-HDS1EU Output/Input Set, 64 EN, L-1 OUTPUT and L-1 INPUT Setting, 8 L-1 OUTPUT

64 EN EDITING (cont.)

Output/Input Set

C Select the output or input mode for the AV1 (L-1) IN/OUT connector.

APress rt to move the arrow to “L-1 OUTPUT” or “L-1 INPUT”, then press OK.

BPress rt to select the appropriate setting, then

press OK.

*The default setting is bold in the table below.

HDD/VCR SET UP	FUNCTION SET UP INITIAL SET UP
FUNCTION		INPUT/OUTPUT
L-1 OUTPUT			VIDEO
L-1 INPUT			VIDEO
			S-VIDEO
L-2 SELECT			A/V
F-1 INPUT			VIDEO
INDEX	MENU	SELECT WITH
SELECT OK	EXIT	THEN PRESS [OK]

L-1 OUTPUT and L-1 INPUT Setting

The AV1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set “L-1 OUTPUT” and “L-1 INPUT” to the appropriate mode depending on the type of appliance connected to the recorder’s AV1 (L-1) IN/OUT connector.

A Access the Main Menu screen.

Press MENU.

B Access the Input/Output Set screen.

APress w e to move the arrow to “FUNCTION SET UP”, then press t or OK.

BPress w e to move the arrow to “INPUT/OUTPUT”, then press OK.

8L-1 OUTPUT

VIDEO: If a connected appliance’s input is compatible only with regular video signals, set to “VIDEO”.

S-VIDEO:If a connected appliance’s input is compatible with Y/C signals, set to “S-VIDEO”. You can obtain high-quality S-VHS picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

8L-1 INPUT

VIDEO: If a connected appliance’s output is compatible only with regular video signals, set to “VIDEO”.

S-VIDEO: If a connected appliance’s output is compatible with Y/C signals, set to “S-VIDEO”. You can obtain high-quality S-VHS picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

D Return to the normal screen.

Press MENU.

NOTES:

●If “L-1 OUTPUT” is set to “S-VIDEO”, it is impossible to set “L-1 INPUT” to “S-VIDEO”.

●If “L-2 SELECT” is set to “DECODER”, it is impossible to set “L-1 INPUT” to “S-VIDEO”.