JVC HM-HDS1EU specifications Delete a Channel

EN 83

F Input the channel.

Press the number keys to input the channel number you want to store.

●Input “0” before any single number entries.

●To input the registered station name (ID –  pg. 87), press e until “– – – –” (ID setting) begins blinking, then press rt.

●For fine tuning adjustment, press e until “+/–” begins blinking, then press rt. While tuning, “+” or “–” appears.

●When storing a channel that sends scrambled broadcasts, press e until “OFF” (Decoder setting) blinks, then press rt to set “DECODER” to “ON” (“OFF” is the default setting).

●When “L-2 SELECT” is set to “A/V” or “SAT”, the “DECODER” setting cannot be changed ( pg. 65).

G Enter new channel information.

Press OK and the Confirmation screen appears.

●Repeat steps D – G as necessary.

H Close the Confirmation screen.

Press MENU.

●To change positions, see “Change Station Channel Position” ( pg. 84).

●If you wish to set station names other than the ones registered in your recorder, see “Set Stations (B)” ( pg. 85).

ATTENTION

Guide Program numbers are not set when channels are stored manually. If an attempt is made at timer programming with the SHOWVIEW system in this state, “SET GUIDE PROG THEN RETRY” appears on the TV screen; set the Guide Program Numbers ( pg. 79) manually.

Delete A Channel

Perform steps A and C of “Manual Channel Set” on page 82 to access the Confirmation screen before continuing.

A Select the item.

Press rt w e until the item you want to delete begins blinking.

B Delete a channel.

Press &.

●The item directly beneath the cancelled one moves up one line.

●Repeat steps A and B as necessary.

C Close the Confirmation screen.

Press MENU.