42 EN | TIMER RECORDING |
SHOWVIEW® Timer Programming
You can programme this recorder to
With the SHOWVIEW system, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognize.
You can use the remote control with LCD panel to enter the SHOWVIEW number.
Before performing the SHOWVIEW Timer
Programming:
●Make sure that the recorder’s
●Turn on the TV and select the AV mode.
LCD panel
A Turn on the recorder.
Press 1.
B Select the deck.
Press HDD or
●For the VHS deck:
Insert a cassette with the record safety tab intact.
C Access the SHOWVIEW display.
Press LCD PROG.
The LCD panel looks like this:
D Enter the SHOWVIEW number.
Press the number keys to enter the SHOWVIEW number of a programme you wish to record.
●If you make a mistake, press & and input the correct number. The SHOWVIEW number you enter appears on the LCD panel:
E Transfer the SHOWVIEW number.
Press to transmit the SHOWVIEW number from the remote control to the recorder.
●If the number you entered is invalid, “SHOWVIEW NO. ERROR CONFIRM SHOWVIEW NO. THEN RETRY” appears on the TV screen. Input a valid SHOWVIEW number.
●If “SET GUIDE PROG THEN RETRY” appears on the TV screen, set Guide Program Numbers ( pg. 79) manually.
●When “PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME” appears on the TV screen, you need to cancel some of the reserved programmes. ( pg. 46)
F Check the programme data.
The SHOWVIEW number you entered and the matching
●To cancel this setting, press w e to move the arrow to “CANCEL”, then press OK. Or, press PROG.
PROGRAMME
SHOWVIEW NO. 1 2 3 4 5 6 7 8
| RECORD TO |
| REC MODE | WEEKLY/DAILY | VPS/PDC | ||||||
|
|
|
| HDD |
| SEP | WEEKLY | ON | |||
|
|
| START |
| STOP | DATE | TV PROG | ||||
|
|
| 23:30 |
|
| 00:00 | 12/06/01 TUE | 5 CH | |||
| CONFIRM |
| CANCEL | CATEGORY | UNDECIDED | ||||||
|
|
|
|
|
|
|
|
| PROG. CHANGE SETTINGS BY REMOTE | ||
+ |
| + | + | + | |||||||
| – |
|
| – |
| – |
| – | THEN CONFIRM |
| |
START | STOP | DATE | PR | EXIT |
|
|
IMPORTANT
Make sure the channel position number you wish to record is displayed; if not, see “SHOWVIEW® System Setup” on page 79 and set the Guide Program number correctly.