JVC HM-HDS1EU 78 EN, VCR SET UP 2 cont, Function, Video Stabilizer, 8 O.S.D, Auto Timer

78 EN SUBSIDIARY SETTINGS (cont.)

VCR SET UP 2 (cont.)

* The default setting is bold in the table below.

8 VIDEO STABILIZER	When this function is set to “ON”, you can automatically correct vertical
ON	vibration in the picture when playing back unstable recordings made on
OFF	another recorder.

NOTES:

● When you finish viewing a tape, be sure to set this function to “OFF”.

● Regardless of the setting, this function has no effect during recording and during special effects playback.

● The on-screen display may jitter vertically when this function is set to “ON”. ● To watch recordings with close-caption, set this function to “OFF”.

● Video Stabilizer and Digital TBC/NR cannot be used at the same time. If you activate Digital TBC/NR when “VIDEO STABILIZER” is set to “ON”, Video Stabilizer will be automatically turned “OFF”.

FUNCTION

* The default setting is bold in the table below.

8 O.S.D.	When this function is set to “ON”, various operational indicators appear on the
ON	TV screen. Messages appear in the selected language ( pg. 17, 18).
OFF	NOTES:
	● When you use this recorder as the source player for editing, be sure to set “O.S.D.” to
	“OFF” before starting.
	● During playback, the operation mode indicators may be disturbed depending on the
	type of tape being used.
8 AUTO TIMER	When this function is set to “ON”, the timer is automatically engaged when the
ON	recorder power is turned off, and automatically disengaged when the recorder
OFF	is powered back on.
	NOTE:
	For safety, when “AUTO TIMER” is set to “OFF”, all other recorder functions are disabled
	while the Timer mode is engaged. To disengage the timer, press # (TIMER).
8 DIRECT REC	When this function is set to “ON”, you can easily start recording the
ON	programme that you are watching on your TV. Press and hold 7 and press 4 on
OFF	the remote control, or press 7 on the recorder.
	NOTES:
	● When you use the Direct Rec function, be sure to use a TV offering T-V LINK, etc. and
	connect a fully-wired 21-pin SCART cable between the recorder and the TV
	( pg. 12).
	● If “DIRECT REC” is set to “OFF”, the 7 button functions as described in “Basic
	Recording” ( pg. 22, 30).
	● During the Direct Rec, “– –” appears on the front display panel.
	● If a programme is recorded with the Direct Rec, the station name will not be registered
	for the Navigation. “– – – –” will be displayed for the station name.
	● Retake function ( pg. 38) does not work during Direct Rec.
	● Even if there is no power supply for more than 60 minutes, the recorder keeps the
	setting.
	● If you use the remote control of your TV to record the programme with the Direct Rec,
	the programme will be recorded on the HDD deck, even if you select the VHS deck. In
	this case, first few seconds of the programme will not be recorded.