JVC HM-HDS1EU Showview System Setup, Guide Program Number Set, Enter the Guide Program number

EN 79

SHOWVIEW® System Setup

IMPORTANT

Normally, Auto Set Up ( pg. 14), Preset Download ( pg. 16) or Auto Channel Set ( pg. 80) sets the Guide Program numbers automatically. You need to set the Guide Program numbers manually only in the following cases.

●When timer-programming with the SHOWVIEW system, the channel position, where the station you wish to record is received on your recorder, is not selected,

OR

when you add a channel after Auto Set Up, Preset Download or Auto Channel Set has taken place,

—Set the Guide Program number for that station manually.

●When you wish to timer-record a satellite programme with the SHOWVIEW system,

—Set the Guide Program numbers for all satellite broadcasts received on your satellite receiver.

Turn on the TV and select the AV mode.

Guide Program Number Set

A Access the Main Menu screen.

Press MENU.

B Access the Initial Set screen.

E Enter the receiving channel position number.

Press the number key “0” to select “TV PROG” or “SAT”. Then press rt to input the number of the recorder’s channel position on which the Guide Program number’s broadcast is received by the

APress w e to move the arrow to “INITIAL SET UP”, then press t or OK.

BPress w e to move the arrow to “INITIAL SET”, then press OK.

HDD/VCR SET UP	FUNCTION SET UP INITIAL SET UP
TUNER SET	INITIAL SET

INITIAL SET

CLOCK SET

GUIDE PROG SET

SAT CONTROL SET

INDEX	MENU	SELECT WITH
SELECT OK	EXIT	THEN PRESS [OK]

recorder or the satellite receiver. Then press OK or e.

● To timer-record a satellite

programme with the SHOWVIEW

system, you need to install the

provided Satellite Controller and

perform the procedure described

in “Satellite Receiver Control

Setting” ( pg. 19).

● Repeat steps D and E as

(Example) If ZDF is received on channel position 2.

C Access the Guide Program Set screen.

Press rt to move the highlight bar (pointer) to “GUIDE PROG SET”, then press OK or e.

D Enter the Guide Program number.

Press rt to enter the Guide Program number for the desired station as shown in the TV listings. Then press OK or e.

necessary.

F Return to the normal screen.

Press MENU.

Guide Program Number

“Guide Program (GUIDE PROG) number” refers to the assigned TV station numbers, according to broadcast area, for the SHOWVIEW timer recording. The Guide Program numbers can be found in most TV listings.

(Example) When inputting the Guide Program number 2 for ZDF.