2Record an MD.

xN

REC

Notes

1Press Nwhile pressing REC.

Recording starts.

2Play the source you want to record.

To stop recording, press x.

After you press xand “Edit” stops flashing in the display, the recorder will automatically turn off after:

—about 10 seconds when using a battery.

—about 5 minutes when using the supplied AC power adaptor or the optional AC-E30HG (when an AC power adaptor is not supplied).

•“Saving” or “Edit” flashes while data of the recording (the track’s start and end points, etc.) is being recorded. Do not move or jog the recorder or disconnect the power source while the indication is flashing in the display.

•The lid does not open until “Edit” disappears in the display.

To

Press

 

 

Record from the end of the

END SEARCH and press Nwhile pressing REC.

previous recording1)

 

Record partway through the

N, >or .to find the start point of

previous recording1)

recording and press xto stop. Then press N

 

while pressing REC.

 

 

Pause

X2)

 

Press Xagain to resume recording.

 

 

Remove the MD

xand open the lid.3) (The lid does not open while

 

“Edit” flashing in the display.)

 

 

1)By setting “R-Posi” to “Fr End”, recording operations will always start from the end of the previousely recorded material (page 18).

2)A track mark is added at the point where you press Xagain to resume recording while pausing; thus the remainder of the track will be counted as a new track.

3)If you open the lid while “R-Posi” is set to “FrHere,” recording will begin with the first track the next time you record (page 18).

11-GB