2 Press >MENU.repeatedly until “Erase” flashes in the display, and then press ENTER.
“Erase?” and “ENTER” appear alternately in the display.
To cancel erasing, press x.
3 Press ENTER again.
“Edit” flashes in the display, and all the tracks will be erased.
When erasing is complete, “BLANK” appears in the display.
Adding a track mark
You can add track marks so that the part after the new track mark is counted as a new track.
The track numbers will increase as follows.
Add a track mark
1 |
| 2 | 3 | 4 |
| |
|
|
|
|
|
|
|
1 | 2 |
| 3 | 4 | 5 |
|
Track numbers increase |
|
| ||||
T MARK
To add track marks while recording
Press T MARK at the point you want to add a track mark.
Note
You cannot add track marks during synchro- recording.
Erasing a track mark
When you record with analog (line) input, unnecessary track marks may be recorded where recording level is low. You can erase a track mark to combine the tracks before and after the track mark. The track numbers will change as follows.
Erase a track mark
1 2 3 4
1 2 3
Track numbers decrease
X
T MARK
.
1 While playing or pausing an MD, press T MARK at the point you want to mark.
“MK ON” appears in the display, and a track mark is added. The track number will increase by one.
1 While playing the track with the track mark you want to erase, press Xto pause.