Checking the remaining time or the recording position
You can check the remaining time, track number, etc. when recording or during stop.
>MENU.
ENTER
1 While the recorder is recording or stopped, press ENTER, press >MENU.repeatedly until “DISP” flashes in the display, and then press ENTER again.
2 Press >MENU.repeatedly until the information you want flashes in the display.
Each time you press MENU., the display changes as follows.
LapTim (elapsed time)
r
RecRem (remaining time for recording)1)
r
AllRem (remaining time after the current location)2)
1)“REC REMAIN” start flashing in the display when the remaining time for recording become 3 minutes or less.
2)Appears only when the recorder is stopped.