Checking the remaining time or the playing position
You can check the track name, disc name, etc. during playback.
>MENU.
ENTER
1 While the recorder is playing, press ENTER, press >MENU. repeatedly until “DISP” flashes in the display, and then press ENTER again.
2 Press >MENU.repeatedly until the information you want flashes in the display.
Each time you press MENU., the display changes as follows.
LapTim (erapsed time)
r
1 Rem (remaining time of the current track)
r
AllRem (remaining time after current location)
3 Press ENTER.
The display changes as follows.
AB
AB
Elapsed time | Track number |
AB
Remaining time of | Track name1) |
the current track |
|
|
|
Remaining time | Disc name1) |
after the current |
|
location |
|
1)Appears only if the track has been labeled.
z
If you want to check the remaining time or the recording position while recording or in stop mode, see page 20.
Locking the controls (HOLD)
To prevent the buttons from being accidentally operated when you carry the recorder, use this function.
HOLD
1 Slide HOLD in the direction of the
..
To unlock the controls
Slide HOLD in the opposite direction of the arrow.