Editing recorded tracks
You can edit your recordings by adding/ erasing track marks or labeling tracks and MDs. Premastered MDs cannot be edited.
Notes on editing
•Do not move or jog the recorder while “Edit” is flashing in the display.
•You cannot edit tracks on an MD that is
•If you perform an editing operation while playing, be sure not to turn the power off until “Edit” disappears in the display.
•The lid does not open until “Edit” disappears in the display after editing.
Erasing tracks
To erase a track
Note that once a recording has been erased, you cannot retrieve it. Make sure of the track you are erasing.
2 Press >MENU.repeatedly until “ 
” and “Erase” flash in the display, and then press ENTER.
“Erase?” and “ENTER” appear alternately in the display.
To cancel erasing, press x.
3 Press ENTER.
The track is erased and the next track starts to play. All the tracks after the one erased are automatically renumbered.
To erase a part of a track
Add track marks at the beginning and the end of the part you want to erase, then erase the part (page 26).
To erase the whole disc
You can quickly erase all the tracks and data of the MD at the same time.
Note that once a recording has been erased, you cannot retrieve it. Be sure to
>MENU.
x
ENTER
check the contents of the disc you want to erase.
x
1 While playing the track you want to erase, press ENTER, press >MENU.repeatedly until “EDIT” flashes in the display, and then press ENTER again.
“
” and “Name” flash in the display, and the recorder plays the selected track repeatedly.
>MENU.
ENTER
1 While the recorder is stopped, press ENTER, press >MENU. repeatedly until “EDIT” flashes in the display, and then press ENTER again.
“ 
” and “Name” flash in the display.
continued