Recording with analog input (line cable required)

The sound will sent from the connected equipment as analog signal but will be recorded digitally on the disc.

CD player, cassette recorder, etc.

to LINE OUT

L (white) R (red)

Line cable (RK-G129, not supplied)*

to LINE IN (OPTICAL)

∗Use the connecting cords without an attenuator. To connect to a component such as a portable CD player having a stereo mini-jack, use the RK-G136 connecting cord (not supplied).

1Insert a recordable MD and start recording.

For recording operations, see

“Recording an MD right away!” (page 10). To record from a portable CD player, set the CD player to pause and then start recording.

16-GB

LINE IN (OPTICAL) jack is for both digital and analog input

The recorder automatically recognizes the type of line cable and switches to digital or analog input.

Note

A track mark is added at the point where you press Xagain to resume recording while pausing recording; thus the track will be counted as a new track.

Recording for long times

Select each recording mode according to the recording time that you want.

Stereo recording is possible at 2 times (LP2) or 4 times (LP4) the normal recording time.

MDs recorded in monaural, LP2 or LP4 mode can be played back only on MD players or recorders with monaural, LP2 or LP4 playback mode.

>MENU. N

REC

ENTER

1 Press ENTER, press >MENU.repeatedly until “R- MODE” flashes in the display, and then press ENTER again.