This set can display and check the error count occurring during record and play.
• Setting method of Sound Skip Check Result Display Mode
1.Setting the test mode. (See page 13)
2.Press the N or [REC] key on the set activates the sound skip check result display mode where the LCD displays as shown below.
When N or [REC] key on the set is pressed:
LCD display
000P * * R * *
Total of record system error count
Total of play system error count
3.When N key or N > key on the remote commander is pressed, the total of error count is displayed on the LCD, and each time the > key is pressed, the error count descents one by one as shown below. Also, when . key is pressed, the error count ascends by one. If [REC] key on the set is pressed, the error count during record is displayed.
000 | P * * R * * | |
|
| |
|
|
|
000 | E I B * * | |
000S t a t * *
000A d r s * *
000B E m p * *
000# # # # # #
**: Sound skip check items counter (hexadecimal)
###### :
4.When [REC] key on the set is pressed, the total of error count is displayed on the LCD, and each time the > key is pressed, the error count descents one by one as shown below. Also, when . key is pressed, the error count ascends by one. If N key is pressed, the error count during play is displayed.
000P * * R * *
000B O v r * *
000B f u l * *
000R t r y * *
000# # # # # #
**: Sound skip check items counter (hexadecimal)
###### :
Error code
| Cause of error | Description of error | |
| EIB | Sound error correction error | |
Playback | Stat | Decorder status error | |
Adrs | Cannot access the address | ||
| |||
| BEmp | Buffer becomes empty | |
| BOvr | Buffer becomes full and sounds are | |
|
| dumped | |
Recording Bful | Buffer capacity lowers and data are | ||
|
| forcibly written | |
| Rtry | Retry count over | |
|
|
| |
5.Quit the sound skip check result display mode, and press the x key to return to the test mode (display check mode).
