4-7. KEY CHECK MODE
This set can check if the set and remote commander function nor- mally.
• Setting Method of Key Check Mode
1.Setting the test mode. (See page 13)
2.Press the [T MARK] or [DISPLAY] key on the remote com- mander for several seconds activates the key check mode where all segments of LCD turn OFF. (At the last two digits of DOT section, AD value of remote commander key line is displayed in hexadecimal)
3.When each key is pressed, it is displayed on the LCD, imply- ing that it was successfully checked as shown below. How- ever, for the slide switch on the set, it is not checked unless it is reciprocated.
*The key pressed to enter the key check mode was already checked at that time.
Set key
Key | Indication |
N | PLAY |
> | FF |
. | FR |
X | PAUSE |
VOL + | VOL + |
VOL – | VOL – |
|
|
x | STOP |
REC | REC |
|
|
END SEARCH | END S |
|
|
MENU . | JOG+ |
MENU > | JOG– |
|
|
ENTER | PUSH |
T MARK | T MARK |
HOLD (hold) | HLDon |
HOLD (off) | HLDoff |
SYNCHRO REC (on) | SYCon |
SYNCHRO REC (off) | SYCoff |
Remote commander key
Key | Indication | ||
|
|
|
|
N/> | rPLAY | ||
. |
| rFR | |
|
|
|
|
X | rPAUSE | ||
VOL + | rVOL + | ||
VOL – | rVOL – | ||
x | rSTOP | ||
PLAYMODE | rPMODE | ||
DISPLAY |
| rDISP | |
HOLD (hold) |
|
|
|
|
|
| |
|
|
|
|
HOLD (off) |
|
|
|
|
|
| |
4.The test mode (display check mode) is automatically activated when all keys on the set and remote commander were checked (see above). Also, the test mode (display check mode) gets back if opening the upper panel during a key check.
