Various ways of playback
Viewing various information
You can check the track name, disc name, etc. during playback.
MENU
Jog dial
1 Enter the menu and select “Display”.
2 Turn the jog dial to select the information you want, and then press the jog dial to enter the selection.
Each turn selects the display as follows.
“Lap Time” t “1 Remain” t “Tr Property”
When you press the jog dial, the selected information appears at A,
Band C.
While the recorder is stopped
Lap Time
ATrack number Group number1)
BElapsed time
C Track name
Artist name
Group name (MD)
Album name
Disc name (MD)
1 Remain
ATrack number Group number1)
BRemaining time of the current track
C Track name
Artist name
Group name (MD)
Album name
Disc name (MD)
Tr Property
ATrack number Group number1)
BElapsed time
C Track name
Group name
Codec information
1)Appears when the Main play mode is set to “Group Play”.
2)If the case of an MP3 track that supports VBR (Variable Bit Rate), the bit rate that appears here may not match the one displayed by the SonicStage software.
3)Appears for tracks that have time stamp information.
Note
Depending on the group settings, the operating conditions, and the disc settings, you may not be able to select certain indications or the indications may appear differently.
z
If you want to check the remaining time or the recording position while recording or in stop mode, see “Viewing various information” (page 31).
39