Press x.

Notes

•When the total number of characters in the titles on a disc exceed the maximum that can be input:

—If the disc is being used in Hi-MD mode, you can make a group setting, but cannot add a group name in step 4.

—If the disc is being used in MD mode, you cannot make a group setting.

•The tracks or groups must be sequential. If the desired tracks or groups are not consecutive, you must move them to make them consecutive before you can assign them (“Moving recorded tracks or groups (Move)”, page 51).

MENU

Jog dial

3 Turn the jog dial to select the number

of the desired last track, and then press the jog dial to enter.

This selects the last track of the new group and the group can be labeled. If the disc contains groups, only the last track number of each group is displayed.

4 Label a group (see “Adding titles (Title Input)” (page 46)).

Notes

•In step 2, the first track must be either the first track of an existing group or a track that does not belong to a group.

•When selecting the last track in step 3, make sure the track comes after the one selected in step 2. The last track must be either the last track of an existing group or a track that does not belong to a group.

1 While the recorder is stopped, enter the menu and select “Edit” - “Group Set”.

2 Turn the jog dial to select the number of the desired first track, and then press the jog dial to enter.

This selects the first track of a new group. If the disc contains groups, only the first track number of each group is displayed.

Releasing a group setting (Group Release)

Select a group you want to release and check the contents (see “Listening to tracks in a specific group (Group Play)” on page 40).

x

MENU

Jog dial

1 Select a group that you want to release and check the contents (see page 40).

2

3 Enter the menu and select “Edit” - “GroupRelease”.

50